Architecture
The bulldozers have a strong and sturdy chassis low to the ground with a cab on top and the engine in front of the cab. At the front of the machine, a streamlined blade is steered by two hydraulic arms which allows it to raise or lower. At the rear you can adapt a single tine or three tine ripper which will be used to open the ground after the passage.
Use
The blade in the low position allows scraping with a depth of 20 to 30 cm allowing horizontal earthmoving. In the intermediate position, the earthwork can be adjusted in selected layers. There are also angledozers that angle the blade in the direction of the machine. At the rear, it is possible to mount a ripper allowing ripping with a variable number of coulters. This makes it possible to level the ground, strip topsoil, level the land, clear trees, push scrapers or even pull plows.
Our stock
The entries and exits are recurring so we may not have what you are looking for at the moment so do not hesitate to come back to see our stock from time to time. We also have a wide range of used bulldozers ranging from the lightest to the heaviest and of all brands including Caterpillar, Komatsu, Liebherr, Fiat Hitachi, Case, Shantui and Fiat Allis.